Melted Laser Fibre ST600F for repair

Repair laser fibre ST600F

We receive many inquiries on laser fibre ST600F that is damaged after prolong use. Above is a Laser fibre ST600F 600 microns for repair. The connector in the above image is burnt by laser after prolong usage and require immediate service to replace the laser connector. In most common cases, the ends of the laser fibre has to be terminated, polished, cleaned and new connectors have to be fitted to the Laser fibre. We will also need to perform a general check to ensure that there is no other damage other than the laser burn on the ends.

Our company can offer free assessment and quotation for high power laser fibre delivery assemblies. As part of wear and tear after prolong use, laser fibre delivery assemblies are considered disposables and are not covered by most service contracts. In most instances, replacement of laser fibre assemblies are in the range of thousands and this would greatly impact on their overall cost of operations.

At Gold Technic, having your Laser fiber repaired will save you a lot of money and the repaired Laser fibre will last just as long as a new replacement. Our on site fibre repair team can offer quick turn around times to minimise downtime of your machine. A typical Laser fibre repair procedure typically takes about five to  ten days  depending on its complexity. Besides the D80 connectors, we can also custom the fibre termination with other types of connectors such as the SMA connectors.