Agiontex Filter user Instructions

package roll

 Agiontex Filter User Instruction

Cloth masks are generally more effective when they have more layers, a BFE% filter will add filtration efficiency of the face mask. Agiontex filters can help reduce inhalation exposure to certain airborne biological particles( eg. Virus, mould, bacteria etc) but cannot eliminate the risk of contracting infections, illiness or disease. Cut Agiontex mask filter to mask size. Insert the filter layer in the pocket of the face mask. If the mask does not have a pocket, place filter between the mask and your face. The embossed side of the filter fabric in contact with your face for maximum comfort and longevity of the filter.

filter-instructions

After use, store Agiontex filter in the original packaging, away from contaminated areas, dust, sunlight and extreme temperatures, excessive moisture and damaging chemicals.

 

Before use, store Agiontex filters in the original packaging away from contaminated areas, dust, sunlight, extreme temperatures, excessive moisture and damaging chemicals. When stored in accordance with temperature and humidity conditions specified below, the product is safe to use.

Storage Temperature Range -20°C (-4°F) to +30°C (86°F)

Storage Maximum Relative Humidity <80% RH

 

Failure to follow all instructions and limitations on the use of this filter and/or failure to wear this filter  during all times of exposure can reduce filter effectiveness and may result in sickness.

 

 Agiontex Filter Usage Recommendation

Unlike masks,  Agiontex Filter are not reusable and should be replaced approximately everyday after use. We do not recommend to wash the filter as the bacteria and dust will accumulate on the filter once it is exposed to the environment. If filter becomes damaged, soiled or breathing becomes difficult, leave the contaminated area immediately and replace the filter.

 

Do Not Use For

Do not use for gases and vapors, oil aerosols, or sandblasting; particulate concentrations that exceed either 10 times the occupational exposure limit or applicable government regulations, whichever is lower

 

FAQ

  1. Can the filter fit a 3D mask?

Yes, you can cut the filter to size. According to the shape of the face mask.

  1. Can the filter be used during Haze season

Yes the filter can be used to filter out dust particles from vehicle pollution, pollen and bacteria in the air

  1. Does the mask filter come with adhesive?

No it does not come with adhesive. You can use a double side tape to secure it.